rtc implementation

[cortex-from-scratch] / clock.c

diff --git a/clock.c b/clock.c
index 2bcca11..02a26ab 100644 (file)
--- a/clock.c
+++ b/clock.c
@@ -13,9 +13,6 @@
  * Some buses might not support the maximum speed and
  * should be prescaled (i.e. low speed APB)
  * 
- * 2. Routines to setup a real time clock (RTC). A external 
- * low speed oscillator (LSE) is used. 
- *
  * $USAGE
  * Check external crystals on board and maximum speed
  * for buses. In this example, a 8 Mhz external crystal
@@ -48,34 +45,11 @@ static void setup_hse() {
        while(!rchkbit(RCC_CFGR, 3)); /* Wait for the clock switch to complete */
 }
 
-static void setup_rtc() {
-
-// TODO: long time to get stable?
-//     /* Enable PWREN and BKPEN */
-//     rsetbit(RCC_APB1ENR, 28);
-//     rsetbit(RCC_APB1ENR, 27);
-//
-//     /* Enable access to backup registers and RTC */
-//     rsetbit(PWR_CR, 8);
-//
-//     rsetbit(RCC_BDCR, 0); /* LSE enable */
-//     while(!rchkbit(RCC_BDCR, 1)); /* wait for LSE to come up */
-//     
-//     rsetbitsfrom(RCC_BDCR, 8, 0x1); /* use LSE as RTC source */
-//     rsetbit(RCC_BDCR, 15); /* enable RTC */
-//     
-
-}
-
 void clock_init() {
 
 #ifdef ENABLE_HSE
 setup_hse();
 #endif
 
-#ifdef ENABLE_RTC
-setup_rtc();
-#endif
-      
 }