From: Robin Krens Date: Thu, 15 Feb 2024 10:09:06 +0000 (+0100) Subject: README.md: initial readme X-Git-Tag: v0.0.1~10 X-Git-Url: https://robinkrens.nl/gitweb/?a=commitdiff_plain;h=40599a8fb1d2a67feff18759c17e4dfcb4b81651;p=renesas-ra-flasher README.md: initial readme --- diff --git a/README.md b/README.md new file mode 100644 index 0000000..46cf35d --- /dev/null +++ b/README.md @@ -0,0 +1,74 @@ +# Renesas RA flasher +Flasher for the built in ROM bootloader for Renesas RA microcontrollers + +## Requirements +- Python >= 3.6 +- venv + +## Local install +*Strongly Recommended to use venv (https://docs.python.org/3/library/venv.html)* +- python -m venv .venv +- source .venv/bin/activate +- pip install -r requirements.txt +- pip install -e . + +## Package +WIP: currently in development mode + +## Usage +``` +usage: RAFlasher.py [-h] {write,read,erase,info} ... + +RA Flasher Tool + +options: + -h, --help show this help message and exit + +Commands: + {write,read,erase,info} + write Write data to flash + read Read data from flash + erase Erase sectors + info Show flasher information +``` +Each command has various options. For example, use RAFlasher write -h to see all write options: +``` +usage: RAFlasher.py write [-h] [--start_address START_ADDRESS] [--size SIZE] [--verify] file_name + +positional arguments: + file_name File name + +options: + -h, --help show this help message and exit + --start_address START_ADDRESS + Start address + --size SIZE Size in bytes + --verify Verify after writing + +``` + +## Dev +[X] Pull requests +[X] Issues + +## Supported functionality +[X] Read +[X] Write +[X] Erase / sector erase +[X] Info / area information +[] ID Authentication +[] Baud rate (only for SCI) + +## Supported interfaces +[X] USB +[] SCI + +## Supported MCUs +[X] RA4 (tested) +[] RA2 (should potentially work) +[] RA6 + +*Note: only tested on RA4 hardware* + +## Resources +https://www.renesas.com/us/en/document/apn/renesas-ra-family-system-specifications-standard-boot-firmware